美国SpinCore公司
您的位置 > 首页 - 产品中心
射频信号采集、监测和处理器RF Signal Acquisition,Detection and Processing

RadioProcessor-通用、宽带、射频激励和数据采集系统,RadioProcessor可作为一个完整的NMR或NQR系统控制台

  • 产品概述和特点
  • 技术参数

    RadioProcessor -Complete RF Acquisition and Excitation System with Digital Detection, Real-Time Signal Processing and Signal Averaging

    RadioProcessor两款型号:◇RadioProcessorPCI.  ◇RadioProcessorUSB


    其他选项:

    ◇ iSpin-Mini - includes RadioProcessorUSB and power supply in single-bay enclosure (see iSpin-NMR manual for more information).

    ◇ iSpin-NMR - complete mobile NMR system.

    ◇ RadioProcessorUSB Power Supply


    ◇  Integrates excitation and acquisition components onto a single PCI card.

    ◇  Directly captures and digitally demodulates IF/RF signals using quadrature detection. The desired baseband bandwidth is user definable through software.

    ◇  Generates completely formed RF excitation pulses as well as high resolution digital control signals.

    ◇  Supports 2 analog I/O channels and 4 digital output channels.

    ◇  Select models have Arbitrary Waveform Generation (AWG or 'shaped pulse') capability.

    ◇  Maintains signal coherence between excitation and acquisition systems at all frequencies.

    ◇  Autonomously signal-averages the baseband data between multiple acquisitions.

    ◇  Samples the input signal at up to 75 Ms/s with 14-bit resolution.

    ◇  Captures input signals above the Nyquist frequency, up to approximately 100 MHz.

    ◇  With signal detection enabled, provides up to 10 MHz bandwidth of baseband data.

    ◇  Direct Digital Synthesis generates RF output pulses with 14-bit resolution up to 300 Ms/s clock frequency.

    ◇  Standard clock stability of 100 ppm, with optional oven-controlled clock oscillator (OCXO) of 200 ppb.

    ◇  Pulse setting resolution up to 13.3 ns, pulses from 66.6 ns to days per interval.

    ◇  Zero-latency phase and frequency switching.

    ◇  Wide-bandwidth input amplifier and A/D converter allow for undersampling applications.